Panasonic AG-DP800HP - Manual (Page 28)

Initializing the Memory and Setting the Date
and Time
When the back-up battery has been replaced, initialize the memory and set the date and time before proceeding with any other
operation.
Set the POWER switch to ON.
When the MENU ON/OFF selector switch is set to ON, the setting
screen (MENU) appears in the viewfinder.
MAIN MENU - DIAGNOSIS -
01 EVF DISPLAY 01 ERROR LOG DATA
□2 CAMERA SETTING 02 CYLINDER 1800h
03 VTR OPERATION 03 CAMERA Ver <1.0)1.1
04 TIME/DATE 04 SERVO Ver A<1.1>
05 TIME CODE
06 AUDIO 05 SYSCON VerB<1.2)
07 BATTERY
-►08 DIAGNOSIS
-►06 MEMORY INIT.?
00 MENU INITIALIZATION * ♦PREVIOUS MENU
- - - E N D O F D A T A - - - - - - E N D O F D A T A - - -
While monitoring the viewfinder display, press the SHIFT button until
the arrow at the far left is aligned with “DIAGNOSIS”.________________
When the START button is pressed, the self-diagnosis (DIAGNOSIS)
screen appears.
Press the SHIFT button until the arrow at the far left is aligned with
“MEMORY INIT.?”.
Press the START button.
“INlT.?” now changes to “INITIALIZED".
The memory initialization is now completed. The next step is to set
the date and time. {See next page.)
28