Charging the pack, Attach the anton/bauer battery pack, Reference – Panasonic AG-DP800HP User Manual
Page 34: How to remove the battery pack, Using the anton/bauer battery pack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Charging the pack
Before using the battery pack, charge it using the battery charger made by Anton/Bauer. For the charging time and
other details, refer to the Operating Instructions of the battery charger used.
Attach the Anton/Bauer battery pack.
Insert the pack in the direction shown by the arrow, and then slide it into place.
Lighting power output connector
Anton/Bauer battery pack
Lighting control switch
The battery hoider
made by Anton/Bauer
comes with a iighting
power output
connector and a
iighting control
switch, which makes
it easy to attach a
iight
For details on the
lighting
systems,
contact Anton/Bauer.
Set menu item 7 “BATTERY” (battery selection) to the battery which is
going to be used.
For further details, refer to "How to set the menu items” (page 52).
REFERENCE
How to remove the battery pack
Pull the disengaging lever on the battery holder all the way down and, while keeping the lever down, slide the battery pack in the
direction shown by the arrow.