Panasonic AG-DP800HP - Manual (Page 50)

Set the TC/UB/COUNTER selector switch to TC or UB.
TCUBCOUHnn
(3D
•When the switch is set to TC, the time code data will be set.
•When the switch is set to UB, the user bit data will be set.
Set the data.
Press the SHIFT button.
/----------------- --------------- \
SHIFT o
^_________ _________
)
To change the flashing number, press the SET + or SET — button.
- SET + o o
If the RESET button is pressed at this stage, the data is cleared to
zero and the setting mode is released.
B After the data has been set, press the START button.
r
The data will not be set if the TC/UB/COUNTER selector switch is
now set to a different position without the START button having first
been pressed.
50