Panasonic AG-DP800HP User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Use a screwdriver to mount the AU-M402 on the camera recorder.

The holes for tightening the screws are visible when the lid is opened and the rubber caps are pulled away. Mount the

battery case onto the camera recorder by tightening the screws with a screwdriver. Tighten up the screws as far as
they will go.

Connect the battery pack’s plug to the connector inside the battery

* case, and insert the battery pack into the case.

Make absolutely sure that the camera recorder’s power is off before attempting to connect or disconnect the plug.

Set menu item 7 “BATTERY” (battery selection) to “Ni-Cd 12 V”,

For further details, refer to “How to set the menu items” (page 52).