Panasonic KX-E4500 - Manual (Page 48)

Out of the Correction Memory
When you reach the last line in the correction memory, the
KX-E4500 will beep and you will be unable to use the BACK
SPACE or CODE + REVERSE INDEX ( f ) keys to advance to
the previous line. Two methods of correction are available outside
of the correction memory; the No Print method and Manual Cor­
rection .
+
T
PREVIOUS
+
SPACE BAR
BACK
SPACE
Using the No Print Method
The No Print method enables you to retype errors into the correc­
tion memory without re-printing them. This feature is especially
useful when correcting errors typed in proportional spacing (PS),
or in the JSTFY mode.
1
Press CODE -1- CANCEL ((^) to exit the correction memory
2
Press REVERSE INDEX ( f
)
to position the printer on the
desired line
3
Press the CODE
+
PRINT key
The message “NOPRINT” will appear.
4 •
If the text was typed in 10, 12, or 15 pitch:
Position the mode selector to NORM
SPACE to position the printer on the error and retype the
incorrect characters
• If the text was typed in PS pitch:
Retype from the beginning of the line to the error
• If the text was typed in JSTFY mode:
Retype the entire line until the printer automatically returns
to the next line
Press CANCEL ((^ ) until all characters are deleted from
the display and the primer advances to the end of the
previous line
BACKSPACE to position the printer to the right of the
error
38