Panasonic KX-E4500 - Manual (Page 243)

12-7 TROUBLESHOOTING
PROBLEM REMEDY
1. Character spacing is erratic. • Make sure the “Pitch Selector” agrees
with the pitch indicated on the
daisywheel.
2. Character printout is not clear. • Make sure the ribbon is good.
• Make sure the “Pitch Selector” and
“Impact Control Selector” are set
correctly.
3. Characters cannot be printed. • Make sure the daisywheel is mounted
correctly on the printer.
• Change the ribbon cartridge.
4, Characters cannot be cancelled. • Make sure the correction tape matches
the type of ribbon cartridge being used.
• Make sure the correction tape is installed
correctly.
• Change the correction tape.
5. Character printout is scrambled. • The printwheel is misaligned. Press
CODE + T to reset the typewriter.
233