Changing the correction tape – Panasonic KX-E4500 User Manual
Page 237
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the Correction Tape
1 Lift out the ribbon cartridge and remove the two spools of
lift-off tape
2 Place the loaded spool of the new tape on the left pin
3 Feed tape around white spools. Place empty spool on the right
pin
4 Manually turn the right hand spool counter-clockwise, tight
ening the tape until resistance is felt
5 Replace the typing ribbon cartridge
227