BendixKing SKYMAP IIIC - Manual (Page 64)

DETAILED OPERATION
have the cursor over the correct database, pressing Key 2, SELECT, will move you onto
the next selection process, which is Screen 16, Item Selection.
As stated above, Key 3, NEAR APTS and Key 4, NEAR NAVAID, only appear if this
Screen has been entered after performing a DIRECT TO in Screen 38, Map Mode. For
more information on the function of these keys, please refer to the “Ten Nearest” under the
NAV Menu Screens Section in this Manual.
Also as stated above, Key 5, TEMP WPT, only appears if this Screen has been entered
after performing a DIRECT TO in Screen 38, MAP Mode. If you press Key 5, this will take
you to Screen 15 (see below), which allows you to enter a DIRECT TO point.
If Key 1, PREV PAGE, is pressed to discontinue the selection process the unit will return
to whichever the previous Screen was, Screen 12, Flight Plan Program / Edit Screen, or
Screen 38, MAP Mode.
D
E
T
A
IL
E
D
O
P
E
R
A
T
IO
N
Screen 15: DIRECT TO Destination Input Screen
This Screen allows you to select a DIRECT TO specific latitude and longitude, and is
reached by pressing Key 5 TEMP WPT on Screen 13.
Use the joystick to enter the latitude and longitude of the destination then press Key 5,
ENTER, and Screen 47, Map Mode with Navigation Information, will appear with DIRECT
TO OFF on Key 5.
Rev 9 Jul 2006 3-21 Skymap/Tracker IIIC Pilot's Guide