BendixKing SKYMAP IIIC - Manual (Page 36)

QUICK REFERENCE GUIDE
FLIGHT PLANS
Editing/Creating A Flight Plan Manually
From MAIN MENU select the FLIGHT PLAN key followed by EDIT FPLN. Use the
joystick to select the desired flight plan number and then press SELECT. To insert an item
press INSERT ITEM and follow the Database Selection process explained earlier in this
section of the manual.
Q
U
IC
K
R
E
F
E
R
E
N
C
E
To remove an item from the flight plan move the c
by
you
diting/Creating A Flight Plan
ursor over the item using the joystick
and press DELETE ITEM. A flight plan
can be systematically built using the
INSERT ITEM key.
The flight plan can be inverted
pressing the INVERT FPLN key. If
wish to fly the flight plan, ensure that the
flight plan arrow (shown on the side of
the flight plan list) is highlighting the leg
you wish to fly, the press FLY FPLN.
Alternatively use the SAVE & EXIT key
to return to the Flight Plan Cover Page,
saving any changes made.
E
Visually
From MAIN MENU select the FLIGHT PLAN key, followed by EDIT FPLN. Use the
joystick to select the desired flight plan number and then press VIEW MAP.
If the selected flight plan was empty, the
adjacent screen will appear showing your
last position; If it was not, the start point
of the flight plan will be shown in the
centre of the screen. If the desired flight
plan was empty you can use the joystick
to move the pointer to the desired start
waypoint and press ADD WPT (ADD
WayPoinT).
This will place an S (for Start) next to the
waypoint. Move the pointer to the next
waypoint and press ADD WPT again.
This will place an E (for End) next to the
waypoint. In either case when the ADD
WPT key is pressed the unit will try to
attach the turning point to a displayed waypoint. If one is not available it will create a user
waypoint in the next available memory location.
Rev 9 Jul 2006 2-7 Skymap/Tracker IIIC Pilot's Guide