BendixKing SKYMAP IIIC - Manual (Page 42)

QUICK REFERENCE GUIDE
CDI SCALE: Sets the full-scale deflection of displayed CDI to 0.3, 1.0, 2.5 or 5.0nm.
CDI DISPLAY: Either turns the CDI display off, or sets it to either a numeric or bar
display.
CDI ALARM: Switches the CDI alarm on or off. When on, the alarm is activated at full-
scale deflection.
WPT ALERT: Sets the distance away from your destination waypoint at which you wish
the audio and visual arrival alarms to be activated. This value is always in nautical miles.
AUTO LEG SELECT: When switched on, the unit will automatically determine which is
the most appropriate leg to fly when calling up a flight plan.
Q
U
IC
K
R
E
F
E
R
E
N
C
E
e
AUTO NEXT LEG: When switched on, the unit will automatically sequence you on to the
next waypoint in a flight plan when it has deemed that the current waypoint has been
passed. When switched off the user will be expected to press the NEXT LEG key in MAP
mode to sequence on to the next waypoint in the flight plan.
TURN ANTICIPATION: Turn Anticipation provides navigation along a curved path segment
to ensure a smooth transition between two adjacent legs in the flight plan at higher
groundspeeds.
FLIGHT PLAN DISPLAY: Allows a choice of displaying the full flight plan or just the
active leg on the map screen.
INTERNAL (ARRIVAL and CDI) ALARM: These alarms can be switched on or off.
EXTERNAL (ARRIVAL and CDI) ALARM: These alarms can be switched on or off.
Any changes made in this screen will be saved once the SAVE & EXIT key has been
pressed. At any time the RESET VALUES key can be pressed to return your unit to the
default settings. If you wish to reset all setup options (including MAP SETUP options) to
their default setting press the CLEAR SETUP key in the Clear Memory screen.
CLEAR MEMORY
To clear down specific parts of your units’ memory press SET UP in MAIN MENU, followed
by INST & DIAGS and CLEAR MEMORY. You will then be asked to enter you’re your PIN
(unit default is 1-2-3-4). You are now in the Clear Memory screen.
Each block of memory in your unit can b
cleared down individually. CLEAR
FPLNs will remove all your flight plans.
CLEAR WPTS will remove all your user
waypoints. CLEAR SETUP will restore
all the default settings in MAP SETUP
and NAV SETUP. CLEAR LOG will
clear the last flight information, the 2000
logged flight data points and all running
timers.
Rev 9 Jul 2006 2-13 Skymap/Tracker IIIC Pilot's Guide