BendixKing SKYMAP IIIC - Manual (Page 37)

QUICK REFERENCE GUIDE
To systematically create additional legs,
draw a line from the waypoint marked
(E), with the pointer, to the next waypoint
and press ADD WPT again. You will
notice that the last point in the flight plan
will always be labelled (E). Once you
have finished building the flight plan
press PREV PAGE, to detach the pointer
from the flight plan. This key, if pressed
again will return to the screen entered
from, saving any changes made.
QUIC
K REF
E
REN
C
E
INE
r
ck
o
the joystick to select the desired flight plan numb
itial leg that is to be flown and press
If you wish to add a new waypoint to a
flight plan which you have stopped
building, whether it is at the start, the end
or the middle of the flight plan, you will
need to highlight the appropriate point
(i.e.: either the start waypoint (S), the end
waypoint (E) or the leg line in which you
wish to add a new waypoint). As soon as
you do this, the ADD WPT or GRAB L
key will appear. Press the ADD WPT o
GRAB LINE key to join the pointer ba
to the flight plan line and then move it t
the new waypoint (NOTE: Key 2 reverts
to ADD WPT).
Once over the new waypoint press ADD
WPT, otherwise press PREV PAGE to
cancel this action. Unwanted waypoints
can be removed by pointing at them and pressing the DELETE WPT key. Use the PREV
PAGE key to return to the screen entered from, saving any changes made.
Selecting A Flight Plan To Fly
From MAIN MENU select the MAP key, followed by NAV MENU and FLIGHT PLAN. Use
er and then press the SELECT key.
Ensure that the leg arrow is pointing at
the in
FLY FPLN. The unit will immediately
revert to map mode with the navigation
information showing, using the pre-
selected MAP mode presentation
Rev 9 Jul 2006 2-8 Skymap/Tracker IIIC Pilot's Guide