BendixKing SKYMAP IIIC - Manual (Page 105)

SETUP SCREENS
activated.
AUTO LEG SELECT: If you select this ON, the unit will automatically place the cursor on
the closest leg when Screen 12, Flight Plan Program / Edit Screen, is accessed to select
the flight plan. Although the nearest leg to your present position is highlighted, an
alternative leg may be selected by using the joystick. If AUTO LEG SELECT is switched
OFF the cursor will simply be positioned over the first leg in the flight plan whenever
Screen 12 is selected.
AUTO NEXT LEG: If you select this option ON then, as each waypoint in the flight plan is
passed, the next leg will be automatically selected. You thus do not need to press Key 1
(the NEXT LEG Key) as this function produces the same effect automatically. If you select
AUTO NEXT LEG to OFF, you will then need to activate the next leg in the flight plan
manually by pressing Key 1 (the NEXT LEG Key) at the end of each leg, otherwise your
unit will continue to give you distance and bearing information to your previous turning
point.
TURN ANTICIPATION: Turn Anticipation provides navigation along a curved path segment
to ensure a smooth transition between two adjacent legs in the flight plan. If turned ON, Auto
Next Leg will also automatically turn on. Auto Next Leg is an essential part of turn
anticipation. Please refer to Arrival at an En-route User Waypoint in the Map Mode with NAV
Information Screen section of this manual for more details.
FLIGHT PLAN DISPLAY: Allows a choice of displaying the full flight plan or just the
active leg on the map screen.
INTERNAL (ARRIVAL and CDI) ALARM: This gives you the choice between having
these internal alarms functioning or inactive.
EXTERNAL (ARRIVAL and CDI) ALARM: This gives you the choice to switch ON or
OFF the output from the unit, which can drive an external alarm device.
A
P
P
E
N
D
IC
E
S
Rev 9 Jul 2006 A-8 Skymap/Tracker IIIC Pilot's Guide