BendixKing SKYMAP IIIC - Manual (Page 119)

WARNING SCREENS
PIN Lock Warning
Screen 54: Power On Security PIN Entry Screen
If the Auto Power-On Lock function has been activated on Screen 26, this Screen will be
called during initialisation. You must then input the correct PIN before you are allowed to
move back to Screen 1 with full access to all functions.
If an incorrect PIN is entered, Screen 25 will appear and Key 1 will revert to this Screen. If
an incorrect PIN is entered on three consecutive attempts, even if the unit has been
switched off and back on again between attempts, Screen 55 will appear. The number
of incorrect attempts that have been made is stored in NVM and increased with each
incorrect attempt or cleared down once you have managed to enter the correct PIN.
As the PIN is entered, asterisk characters are displayed in place of the question marks.
Key 1 can be used as a Back-Space Key.
Lock Out Warning
APPE
NDICES
Screen 55: Lockout Screen
This Screen will only appear after three incorrect PIN's have been entered on Screen 54
(or if when you switch the unit on the NVM is found to have accumulated three
Rev 9 Jul 2006 B-2 Skymap/Tracker IIIC Pilot's Guide