BendixKing SKYMAP IIIC - Manual (Page 22)

BASIC OPERATION
NOTE PAD Allows up to 4000 characters of text, previously
downloaded from a PC using Flight Manager™
software to be viewed. This Key is only available
if DEMO MODE is not running. DEMO MODE
can only be selected from the first screen after
switching on the unit.
E6-B CALC Allows the E6-B Calculator to be used.
TAS/WIND Allows density altitude, TAS and winds aloft to
be calculated.
V NAV Allows vertical navigation to be Setup.
TRIP/FUEL Allows fuel and trip information to be calculated.
SUNSET/
RISE
Allows sunset and sunrise times to be
calculated.
SETUP Allows Setup of map, navigation and
input/output characteristics.
MAP
SETUP Allows all map functions to be customised,
including map orientation, airport names, map
units, map datum, display orientation, language,
minimum runway length/surface, extended track,
auto zoom, zoom level map de-clutter facility,
data logging rate and position reporting.
NAV
SETUP
Allows all the NAV functions to be customised,
including CDI scale, CDI display, CDI alarm,
arrival alarm, auto next leg/leg selection
philosophy, turn anticipation, flight plan display
and alarms.
PIN SETUP Allows the PIN security function to be Setup.
INST &
DIAGS Allows installation and diagnostics for data
input/output and GPS receiver (Skymap IIIC
only) to be performed. Flight logs can be viewed
and various sections of memory can be cleared
from here.
MAP This is the primary operating mode of the unit.
NAV MENU Accesses all navigation functions and MSA
information. Joystick toggles NAV Mode.
FLIGHT
PLAN
Allows a flight plan to be selected and edited.
NEAR
APTS
Allows emergency search of 10 nearest airports,
providing information and DIRECT TO capability.
Includes Jeppesen and user defined airports
which satisfies the minimum runway length and
surface requirements.
BASIC OPE
RATION
Rev 9 Jul 2006 1-13 Skymap/Tracker IIIC Pilot's Guide