BendixKing SKYMAP IIIC - Manual (Page 46)

DETAILED OPERATION
Main Menu Screen
Screen 2: Main Menu Screen
On Skymap IIIC units, Key 1 calls Screen 3, which is the GPS Status Screen. On Tracker
IIIC units, Key 1 is labelled DATA IN/OUT and will cause Screen 35, Data input/output
Setup and Test Screen, to be displayed. Key 2 calls Screen 7, which is the Flight Planning
Mode Cover Screen. Key 3 will read NOTE PAD if DEMO MODE was not selected on
Screen 1. Pressing Key 3 when labelled NOTE PAD will call screen 62, which is the
NOTE PAD display screen and will also give access to Screen 57, which is the E6-B
Calculator Cover Screen (Refer to Section on E6-B Calculator). If Demo Mode has
previously been activated, Key 3 will read DEMO OFF. Pressing DEMO OFF will then
switch Demo Mode off and return to Screen 2 with Key 3 reading NOTE PAD. Key 4 calls
Screen 21, which is the Setup Cover Screen. Key 5 calls Screen 38 or 47, which are MAP
Mode and MAP Mode with NAV Information Screens.
D
E
T
A
IL
E
D
O
P
E
R
A
T
IO
N
Note Pad Screen
The Note Pad Screen (Screen 62) is accessed by pressing Key 3 on Screen 2, Main Menu
Screen.
Screen 62: Notepad Screen
Rev 9 Jul 2006 3-3 Skymap/Tracker IIIC Pilot's Guide