BendixKing SG 465 System EFS 40/50 - Manual (Page 151)

EADI Displays
on the localizer and glideslope
scales will be displayed accord-
ing to the Category II limits.
Yellow flashing arrows on the
localizer scales and yellow flash-
ing chevrons on the rising run-
way will be displayed if the local-
izer pointer exceeds the limits set
by the arrows (>> < < ) .
Yellow flashing arrows on the
glideslope scales and yellow
flashing GS in the glideslope
pointer will be displayed if the
glideslope pointer exceeds the
limits set by the arrows (>> <<).
All yellow excessive deviation
symbols will flash.
White CAT II will be displayed
below 100 ft., and no excessive
deviation symbology will be dis-
p l a y e d .
Yellow CAT II will be displayed
below 50 ft., and no excessive
deviation symbology will be dis-
p l a y e d .
4.2.16 Issued 8/10 SW 04/05/06/07/08/09/10/11/12/13/14/15/16
CATEGORY II DEVIATION LIMITS
w
CATEGORY II THRESHOLDS
The following Category II deviation limits can be configured for the
comparison of excessive deviation and for the placement of the devia-
tion scale arrows.
Note: The FAR deviation limits are intended for guidance only since
the FAR does not specify operational deviation limits for a CAT II
display. FAR localizer limits will change on initial 300 feet crossing
and will remain at new limits. JAR-AWO old limits, as well as no
excessive deviation limits were added as configuration options by
software 0702.
When activated, Category II limit (>> <<) indicators are displayed on
the glideslope and localizer scale, chevrons will also be displayed on
Section 4.2mp 10/13/10 2:54 AM Page 4.2.16