Waterworks Regulator Gooseneck Single Spout Kitchen Faucet, Metal Wheel Handle and Spray - Manual (Page 3)

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST
REGULATOR
Gooseneck Single Spout Kitchen Faucet Installation Guidelines
Page 3 of 4
Rev - 01
10.9.2014
These guidelines have been prepared for the professional contractor to aid in the installation of:
REGULATOR GOOSENECK SINGLE SPOUT KITCHEN FAUCET WITH METAL WHEEL HANDLE AND SPRAY
(STYLE No. RGKM20, RG20KM UK)
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.
9. Re-install the RUBBER WASHER, METAL WASHER and
NUT and securely tighten the NUT to secure the
SPOUT to the mounting surface.
HOSE CONNECTIONS:
10. Re-attach the TEE from step 1 onto the HOSE from the
TEMPERATURE VALVE BODY with the “green” ZIP TIE
then connect the HOSE from the SPOUT with the
“green” ZIP TIE to the TEE. See Figure – 06.
FIGURE – 06
11. Insert the male end of the SPRAY HOSE into the top of
the TEMPERATURE VALVE BODY then use the
ADAPTER and RUBBER WASHER provided to connect
the EXTENSION HOSE to the SPRAY HOSE. See
FIGURE - 07.
NOTE: The EXTENSION HOSE is marked with a
“
yellow” ZIP TIE and is connected to a TEE that has 2
CHECK VALVES. One of the CHECK VALVES is flow
regulated at 2.2gpm. The other is
NOT flow regulated.
One end of the TEE is capped off.
12. Connect the HOSE from the SPOUT with the “yellow”
ZIP TIE to the TEE then attach the COUNTER WEIGHT
to the SPRAY HOSE. See FIGURE – 07. Do
NOT
connect the HOSE from the SPOUT to the end of the
TEE with the CHECK VALVES.
HOSE
"GREEN"
CAP
HOSE
"GREEN"
TEE
FIBER
WASHER
HOSE
"GREEN"
CAP
HOSE
"GREEN"
TEE
FIBER
WASHER
FIGURE – 07
FINISH AND INSPECT THE INSTALLATION:
13. Attach the SPRAY to the SPRAY HOSE and place it
into the top of the TEMPERATURE VALVE BODY.
14. Attach the CHECK VALVE HOUSINGS from step 1 to
the SUPPLY KITS (not supplied). See FIGURE – 08.
CAUTION: Failure to install the CHECK VALVES onto
the inlet supplies will result in water crossover since
the TEMPERATURE VALVE does not have a shut-off.
FIGURE - 08
EXTENSION
HOSE
"YELLOW"
FIBER
WASHER
HOUSING
FLOW
REGULATING
CHECK
VALVE
FIBER
WASHER
CAP
CHECK
VALVE
TEE
ADAPTER
RUBBER
WASHER
COUNTER
WEIGHT
HOSE "YELLOW"
SPRAY HOSE
EXTENSION
HOSE
"YELLOW"
FIBER
WASHER
HOUSING
FLOW
REGULATING
CHECK
VALVE
FIBER
WASHER
CAP
CHECK
VALVE
TEE
ADAPTER
RUBBER
WASHER
COUNTER
WEIGHT
HOSE "YELLOW"
SPRAY HOSE
SUPPLY KIT
(NOT SUPPLIED)
RUBBER WASHER
ADAPTER
FIBER WASHER
CHECK VALVE
HOUSING
SUPPLY KIT
(NOT SUPPLIED)
RUBBER WASHER
ADAPTER
FIBER WASHER
CHECK VALVE
HOUSING