Pilz PNOZ s4 C 48-240VACDC 3 n/o 1 n/c - Manual (Page 23)

PNOZ s4
Operating Manual PNOZ s4
21396­EN­13 23
Conventional thermal current
while loading several contacts 751134 751184
Ith per contact at UB AC
Conv. therm. current with 1 con­
tact
6,00 A –
Conv. therm. current with 2 con­
tacts
6,00 A –
Conv. therm. current with 3 con­
tacts
4,50 A –
Ith per contact at UB DC
Conv. therm. current with 1 con­
tact
6,00 A 6,00 A
Conv. therm. current with 2 con­
tacts
6,00 A 6,00 A
Conv. therm. current with 3 con­
tacts
4,50 A 5,00 A
Times 751134 751184
Switch­on delay
With automatic start typ. 170 ms 170 ms
With automatic start max. 300 ms 300 ms
With automatic start after power
on typ.
350 ms 350 ms
With automatic start after power
on max.
600 ms 600 ms
With manual start typ. 40 ms 40 ms
With monitored start with rising
edge typ.
35 ms 35 ms
With monitored start with rising
edge max.
50 ms 50 ms
With monitored start with falling
edge typ.
55 ms 55 ms
With monitored start with falling
edge max.
70 ms 70 ms
Delay­on de­energisation
With E­STOP typ. 10 ms 10 ms
With E­STOP max. 20 ms 20 ms
With power failure typ. – 40 ms
With power failure max. – 80 ms
With power failure typ. UB 240 V 300 ms –
With power failure max. UB 240
V
450 ms –
Recovery time at max. switching
frequency 1/s
After E­STOP 50 ms 100 ms
After power failure 100 ms 100 ms
Waiting period with a monitored
start
With rising edge 120 ms 120 ms
With falling edge 150 ms 250 ms