Panasonic NVVX22EG User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DEUTSCH
Uberprüfen des Endes einer
aufgenommenen Szene
(Aufnahme-Prüffunktion)
Diese Funktion ermöglicht bequemes Überprüfen, ob
die zuletzt aufgenommene Szene korrekt aufgenommen
worden ist, indem sie die letzten 2 Sekunden der
soeben beendeten Aufnahme automatisch wiedergibt.
Danach wird die nächste Szene automatisch mit
sauberem, störungsfreiem Bildübergang an die letzte
Szene angefügt. Beim Aufnehmen wichtiger Szenen
sollte diese Prüffunktion von Zeit zu Zeit zur
Bestätigung benutzt werden.
1 Die Aufnahme-Start-/Stop-Taste
drücken, um die Aufnahme zu stoppen.
• Der Oamerarecorder schaltet auf den
Aufnahmepause-Modus um.
2
Auf den LCD-Monitor sehen und die
Taste [-SEARCH] drücken.
• Die Anzeige [CHK] erscheint auf dem LCD-
Monitor, und die letzten ca. 2 Sekunden der
zuletzt aufgenommenen Szene werden
wiedergegeben.
Danach schaltet der Camerarecorder wieder auf
den Aufnahmepause-Modus um und ist zum
Aufnehmen der nächsten Szene bereit.
([CHK] ist die Abkürzung für CHECK
(Überprüfen).)
3
Die Aufnahme-StarWStop-Taste
drücken, um die nächste Szene
aufzunehmen.
ENGLISH
Checking the End of a
Recorded Scene
(Recording Check Function)
By automatically playing back the final approximately 2
seconds of the last recorded scene, this function lets
you check if a just finished scene has been recorded
correctly. After that, the nexti scene is automatically
joined with a smooth transition free from picture
distortion. For especially Important scenes, use this
function from time to time for confirmation.
1 Press the Recording Start/Stop Button
to stop recording.
•The Movie Camera changes over to the
Recording Pause Mode.
2
Look on the LCD Monitor and briefly
press the [-SEARCH] Button.
•The [CHK] Indication appears on the LCD Monitor
and the final approximately 2 seconds of the last
recorded scene are played back.
After that, the Movie Camera returns to the
Recording Pause Mode and is ready for
recording the next scene.
([CHK] means Check.)
3
Press the Recording Start/Stop Button
to start recording again.
54