Welch Allyn SmartLinkTM Wireless - User Manual - Manual (Page 7)

User Manual Overview 3
System requirements
Monitoring Station System requirements
Minimum requirements
• Windows ® NT-class monitoring station computer (Windows ® 2000, Windows ® XP,
Windows ® Server 2003)
• x86 processor
• 50 MB of available hard disk space
• Video card and monitor running at 1024x768
• Mouse (or similar pointing device)
• COM 1 serial port availability
a
• Network/Internet connection
b
• Microsoft ® ActiveSync ®
Recommended system configuration
• Windows ® NT-class receiving station computer (Windows ® 2000, Windows ® XP,
Windows ® Server 2003)
• Intel ® Pentium ® 4 1.0 GHz processor
• 512 MB of RAM
• 500 MB+ of available hard disk space (for 12-Lead data storage)
• Video card and monitor running at 1024x768
• Mouse (or similar pointing device)
• Printer connection, local parallel port or network
• COM 1 serial port availability
a
• Internet Connection
b
• Microsoft ® ActiveSync ®
Gateway System requirements
Minimum requirements
• Windows ® NT-class computer (Windows ® 2000 SP3, Windows ® XP SP2,
Windows ® Server 2003)
• x86 processor
• 5 MB of available hard disk space
• Video card and monitor
• Mouse (or similar pointing device)
• Network/Internet connection
• Microsoft ® .NET TM 2.0.50727 Framework
Note This system should be a dedicated system for the Monitoring station.
a. Only needed if an external modem will be used for paging.
b. Depending on your system configuration, the SmartLink Gateway Monitoring Station and Gateway will need a network and/or Internet
connection to receive 12-Lead data and to send email and text message notifications.
Note This system may be an existing server and does not need to be a dedicated
system.