Welch Allyn Image Capture System - User Manual - Manual (Page 9)

5
Connecting the Welch Allyn Image Capture System
1. Unplug the Video Colposcope and the Video Colposcope Monitor from the electrical outlet
before making any cable connections.
2. Connect the IEEE 1394 cable into the IEEE 1394 port on the computer. Plug the opposite
end of the cable into the port on the DV converter box. Verify that the DV converter box
number 2 and number 6 dip switches are set to on and all other dip switches are set to off.
Also verify that the DV Converter Input Select button is set to analog.
IEEE 1394 Cable
Notebook Computer
IEEE 1394 Cable to
Notebook Computer with
IEEE 1394 card
DV Converter Front
IEEE 1394 Cable
to Desktop
Computer with
IEEE 1394 card
Desktop Computer