Welch Allyn Image Capture System - User Manual - Manual (Page 14)

10
Setting Up the Welch Allyn Image Capture System
System Administrator
Welch Allyn recommends that the System Administrator for the Welch Allyn Image Capture
System change the login password after the first sign in.
1. Login to the Welch Allyn Image Capture System. Your password brings you to the main
Select Session / Create Patient screen.
2. Click on the Settings drop-down menu. Click on the Admin selection in the drop-down menu.
This brings you to the Admin Settings screen.
3. The Passwords tab allows the System Administrator to create a new password or change an
existing password that allows access the Welch Allyn Image Capture System. Please keep
the following information in mind when setting up the passwords:
a. A typed password is required in the Admin password space. Do not leave this space
blank.
b. A typed password is not required in the Application password space.
c. Make sure that the Application and the Admin passwords are different.
d. All passwords are case sensitive.
Save button
keeps new
settings. Cancel button
keeps previous
settings.
This section allows the System
Administrator to create or update
the application password to
access the system.
This section allows the System
Administrator to create or update the
system administrator password to
access the system.