Welch Allyn Image Capture System - User Manual - Manual (Page 18)

14
c. Display Destructive Timestamp on Captured Image. The Timestamp setting
permanently marks the current date and time on the image the moment the image is
captured. Check Yes or No if you want to display this information. If you choose Yes,
the Timestamp formats are available for US or European date coding and 12 or 24
hour time coding. The computer’s date and time settings control the date and time
placed on your image.
4. The Print tab allows the user to decide if they want the file name to print on the page with
the image.
5. Click the Save button to keep the new settings or the Cancel button to keep the previous
settings.
6. Follow these steps to verify the system is functioning as intended:
a. Create a new patient and a new session then capture at least one image.
b. Return to the Create/Select Session screen to select the previously created patient
and session.
c. Confirm that clicking the export button and the print button invoke the Windows
dialog boxes to perform these functions.
d. Delete an image.
e. Log out of the application.
Save button keeps new settings.
Cancel button keeps previous settings.
Click Yes or No to
enable or disable
the date / time
stamp on the
captured Image.
Select one of the
date / time formats
available.
Save button keeps new settings.
Cancel button keeps previous settings.
Check Yes or No
to print the
filename with the
image.