Welch Allyn Image Capture System - User Manual - Manual (Page 22)

18
Using the Video Colposcope Buttons
The Welch Allyn Video Colposcope has three buttons located just above the handle that allows it
to send commands to the Image Capture System. The buttons are identified on the colposcope
as “F”, “C” and “V”.
“F” Button (Freeze)
The “F” button freeze the current frame of live video
the moment the button is pressed. Each press of the
button will freeze a new (current) frame of live video.
The Video Colposcope does not save images with
the “F” button.
“C” Button (Capture)
The “C” button captures the currently frozen frame
or the current frame of live video and saves it to the
patient folder. If an image is currently “frozen”, then
the frozen frame is captured and the system will
continue to display the frozen frame. If the Image
Capture System is currently displaying live video,
then the current frame of live video is captured and
the system will continue to display in live video.
“V” Button (Freeze / Live Toggle)
The “V” button toggles between Freeze and Live
modes. If an image is frozen and the button is pressed, the application returns to Live Mode. If
the Image Capture System is currently displaying live video and the button is pressed, the
application switches to Freeze Mode (displaying a single video frame at the moment the button
is pressed). The Video Colposcope does not save images with the “V” button.
(F)
(C)
(V)