Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 63)

Directions for Use Chapter 5 Reviewing patient data 59
Pulse rate
The pulse rate notation does not include error information.
SpO
2
SpO
2
notation can include error information:
NIBP
NIBP notation can include error information:
Error legend
If any error indicators appear in the printed data, the monitor prints an error legend. The
error legend contains a two-line header followed by a brief explanation of each error type
encountered in the data. The illustration below shows the error legend for a batch of data
containing at least one temperature (P) error, at least one NIBP C04 error, and no
other errors.
Footer
The printout footer consists of a line containing the monitor serial number, a line
containing the monitor software version, two separator lines, and four blank lines:
C7 Malfunctioning sensor.
-- Sensor error.
C01 NIBP cycle cancelled by operator.
C02 Unable to calibrate.
C03 Cuff inflation to rapid.
C04 Excessive cuff inflation time.
C05 Excessive noise or air leak.
C06 Measurement out of range.
C10 Cuff overpressure.
| Error Codes: |
| ------------ |
| (P) Loss of tissue contact |
| C04 Excessive inflation time |
| |
| Unit S/N: JA736455 |
| S/W Ver.: 1.00.00 00005 |
| -------------------------------- |
| -------------------------------- |
| |
| |
| |
| |