Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 61)

Directions for Use Chapter 5 Reviewing patient data 57
Header
Patient information
Patient data
The contents of the Patient Data block reflect the configuration of the monitor; that is,
with or without the SpO
2
option and with or without the temperature option.
For a single cycle, all data except temperature is printed on one line; the temperature
data, if it exists, is printed on a second line. If the data for a single parameter is not
available, nothing is printed in the space provided for that parameter.
The patient data is displayed in a table consisting of a table heading, the current date, and
rows of patient vital-sign data.
Table heading
The Table Heading contains some or all of the following column headings (depending on
monitor configuration):
Welch Allyn
®
| |
| Vital Signs Monitor |
| |
| Patient Name:___________________ |
| Patient ID:_____________________ |
| Physician:______________________ |
| Procedure:______________________ |
| Comments:_______________________ |
| ________________________________ |
| ________________________________ |
| |
| Time Sys Dia MAP PR SpO2 |
| ---- mmHg ---- BPM % |
| --------------------------------- |
or
| Time Sys Dia MAP PR SpO2 |
| ---- kPa ---- BPM % |
| --------------------------------- |
or
| Time Sys Dia MAP PR |
| ---- kPa ---- BPM % |
| --------------------------------- |
or
| Time Sys Dia MAP PR |
| ---- mmHg ---- BPM % |
| --------------------------------- |