Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 5)

1
1
General information
About this manual
This manual contains information about the Welch Allyn ® Vital Signs Monitor 300 Series
monitor. The series includes the following models:
All operators must read and understand this manual before using the monitor.
All technicians and other service personnel must read and understand this manual before
attempting to set up, configure, troubleshoot, or service the monitor.
All information in this manual, including the illustrations, is based on a monitor configured
with the Temperature, SpO
2
, and Printer options. If your monitor configuration lacks any
of these options, then some information in this manual does not apply.
Intended use
The VSM series of monitors are intended to be used by clinicians and medically qualified
personnel for monitoring of noninvasive blood pressure, pulse rate, body temperature,
noninvasive functional oxygen saturation of arteriolar hemoglobin (SpO
2
), and body
temperature in normal and axillary modes of neonatal, pediatric and adult patients.
The most likely locations for patients to be monitored are general med/surg. floors,
general hospital and alternate care environments. This device is available for sale only
upon the order of a physician or licensed health care professional.
Model Features Model Features
53000 Standard (NIBP, Pulse Rate, and MAP) 53S00 Standard + Masimo ® SpO
2
5300P Standard + Printer 53ST0 Standard + Masimo SpO
2
+ Temperature
530T0 Standard + Temperature 53S0P Standard + Masimo SpO
2
+ Printer
530TP Standard + Temperature + Printer 53STP Standard + Masimo SpO
2
+ Temperature + Printer