Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 28)

24 Chapter 2 Setup Welch Allyn Vital Signs Monitor 300 Series
Changing the NIBP measurement units
Default setting: mmHg.
To change the NIBP measurement units:
1. Depress for 3 seconds. SET HOUR XX appears in the message window.
2. Press repeatedly until BP Units: mmHg or BP Units: kPa appears in the
display window.
3. Press or as needed to display the desired NIBP measurement units.
4. To select the displayed units and return to normal operation, either do nothing for 10
seconds or press any button other than
or . If you press a function button (such
as ), the monitor returns to normal operation with that function ( ) activated.
For information on NIBP measurements, see “Patient monitoring” on page 29.
SYS
DIA
SpO 2 %
/min
ºF ºF
mmHg
BP Units: mmHg
SYS
DIA
SpO 2 %
/min
ºF ºF
kPa
BP Units: kPa