Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 24)

20 Chapter 2 Setup Welch Allyn Vital Signs Monitor 300 Series
Changing the time and date
Follow these steps to change the time and date settings of the monitor internal clock.
1. Press and hold for 3 seconds. SET HOUR XX appears in the message window.
2. Press or as needed to change XX to the current hour.
3. Press once to set the hours and change the display to SET MINUTE XX.
4. Press or as needed to change XX to the current minute.
5. Press once set the minutes and to change the display to SET YEAR XX.
6. Press or as needed to change XX to the current year.
7. Press once to set the year and change the display to SET MONTH XXX.
8. Press or as needed to change XXX to the current month.
9. Press once to set the month and change the display to SET DAY XX.
10. Press or as needed to change XX to the current day.
SYS
DIA
SpO 2 %
/min
ºF ºF
mmHg
SET HOUR 00