beautypg.com

Connecting and disconnecting the spo2 sensor cable, Connecting and disconnecting the spo, Sensor cable – Welch Allyn 300 Series Vital Signs Monitor - User Manual User Manual

Page 17

background image

Directions for Use

Chapter 2 Setup

13

Connecting and disconnecting the SpO

2

sensor cable

To connect the SpO2 sensor cable:

1.

Locate the SpO

2

sensor cable connector (labeled SpO2) on the side of the monitor.

2.

Note the hole patterns of the connector halves, and align the cable
connector accordingly.

3.

Carefully insert the SpO

2

cable connector into the SpO

2

monitor connector.

If you are using a sensor extension cable, plug the sensor into the extension cable and
plug the extension cable into the monitor.

See also other documents in the category Welch Allyn Equipment: