Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 62)

58 Chapter 5 Reviewing patient data Welch Allyn Vital Signs Monitor 300 Series
Date
Time
The recording time is printed for each record, in the form hh:mm (using a 24-hour clock),
at the beginning of the first line of the record.
In the illustration below, the first record (21:45) contains systolic and diastolic pressure,
MAP, pulse rate, and SpO2 readings; the second record (21:52) contains systolic and
diastolic pressure, MAP, pulse rate, and temperature; and the third record (22:12) contains
only a temperature reading. When temperature is the only recorded vital sign, the time is
printed on the same row as the temperature reading.
Range and alarm flags
Flag characters (
 and ) indicate a data value that falls outside of a defined range or
violates a programmed alarm threshold. In the illustration above, 69
 indicates a diastolic
pressure value below the programmed alarm limit, and 110.0F
indicates a temperature
value above the monitor’s temperature measurement limit.
Temperature
The temperature notation includes information about the type and location of the
measurement, and can include error notation:
| DD-MMM-YYYY |
| Time Sys Dia MAP PR SpO2 |
| ---- mmHg ---- BPM % |
| --------------------------------- |
| 21:45 125 69

90 72 98 |
| 21:52 125 69

90 72 98 |
| Temp 99.2F NOR/ORL |
| 22:12 Temp 110.0F

NOR/ORL |
Type
F Fahrenheit C Celsius
NOR Normal (predictive) MON Monitored
Location
OrL Oral (Oral probe)
AP Axillary Pediatric (Oral probe)
AA Axillary Adult (Oral probe)
rEC Rectal (Rectal probe)
Error
(P) Discontinuity in tissue contact during the measurement
period. The displayed temperature measurement is not
necessarily accurate.
C20 Broken or missing temperature probe.