Vinten Radamec FHR-35 - Manual (Page 14)

FHR-35 Pan and Tilt Head Robotic
Installation
Wall Mounting
12
Installation and Configuration Guide
User Guide
2. Using a 5/16" Allen key,
attach the head to the
wall mounting bracket
using the six 10-32 cap
head screws and
washers provided.
The FHR-35 can be mounted to a wall using the wall mounting
bracket (part no. 196-728-0044). When mounting the head to
the wall, the cradle is fitted to the head in the standard position.
1. Fit the camera cradle to the tilt
mounting in the standard
positioning. Using a 4 mm
Allen key, secure in position
using the two screws and
washers.