Vinten Radamec FHR-35 - Manual (Page 12)

10
FHR-35 Robotic Pan and Tilt Head
Installation
FHR-35 Pan and Tilt Head Robotic
Setting the Pan Mechanical Hard Stops
3. (a) Move the pan mounting
in a counterclockwise
direction to the required
minimum limit of
movement.
(b) Move the large outer ring
counterclockwise until it
rests on the fixed stop.
(c) Secure the grub screw
into position using a
2.5 mm Allen key. Tighten
the screw to a minimum
of 1.5 Nm (13.3 lbf-in.).
4. (a) Move the pan mounting
in a clockwise direction
to the required
maximum limit of
movement.
(b) Move the inner ring
counterclockwise until it
rests on the outer ring
stop.
(c) Secure the grub screw
into position using a
2.5 mm Allen key.
Tighten the screw to a
minimum of 1.5 Nm
(13.3 lbf-in.).
b c a
b c a
Installation and Configuration Guide