Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 1.0 - Manual (Page 61)

Counterpart User Manual - Serial Commands 55
EDP.ECHO#p Port echo ON, OFF
EDP.EOLDLY#p Port end-of-line delay 0–255 (0.1-second intervals)
EDP.HEADERS#p Port header ON, OFF
EDP.INPUT#p Port input CMD, SCANNER, SCALE, IND SC
EDP.PORT Port reporting command. It responds to the port you are connected to.
EDP.RESPONSE#p Port response ON, OFF
EDP.SFMT#p Port custom stream format 0-200 characters
EDP.SOURCE#p Port source 1, 2, 3
EDP.STREAM#p Port stream OFF, LFT, INDUST
EDP.TERMIN#p Port termination CR/LF, CR
STR.POS Custom stream identifiers None, Space, +
None, Space, -
STR.NEG
STR.PRI 8 alphanumeric characters
STR.SEC
STR.TER
STR.GROSS
STR.NET
STR.TARE
STR.MOTION 2 alphanumeric characters
STR.RANGE
STR.OK
STR.INVALID
STR.ZERO
Command Description Values
CFGPWD Configuration password 0, 1–9999999
CONSNUM Consecutive numbering 0–9999999
CONSTUP Consecutive number start-up value 0–9999999
DATEFMT Date format MMDDYYYY, DDMMYYYY, YYYYMMDD, YYYYDDMM
DATESEP Date separator SLASH, DASH, SEMI
DECFMT Decimal format DOT, COMMA
DSPBRIGHT Sets display intensity 0 (dimmest), through 100 (brightest as a percentage)
KYBDLK Keyboard lock (disable keypad) OFF, ON
REG.AGENCY Regulatory compliance NONE, OIML, NTEP, CANADA, INDUST
REGULAT=NTEP Regulatory compliance NONE, OIML, NTEP, CANADA, INDUST
REG.CTARE Allow clear keyed tare NO, YES
REG.WORD Weighing mode Gross, Brutto
REG.KTARE Always allow keyed tare NO, YES
REG.MTARE Multiple tare action REPLACE, REMOVE, NOTHING
REG.NTARE Allow negative tare NO, YES
REG.ZTARE Remove tare on ZERO NO, YES
Table 6-8. FEATURE Serial Commands
Command Description Values
Table 6-7. SERIAL Port Serial Commands (Continued)