Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 1.0 - Manual (Page 58)

52 Counterpart User Manual
6.1.2 Keypad Lock
The user has the ability to lock or unlock the keypad.
The commands are listed in Table 6-2.
6.1.3 ID Commands
Up to 150 codes c an be entered under ID
commands.
Table 6-3. ID Commands
6.1.4 ETH Commands
ETH commands are parameter setting commands. The
commands listed in Table 6-4 can be used.
Command Parameter
KEYLCK.NUMBER Keys can be locked or
unlocked.
Default for all: Unlock
KEYLCK.PRINT
KEYLCK.TARE
KEYLCK.ZERO
KEYLCK.SAMPLE
KEYLCK.GROSSNET
KEYLCK.UNITWT
Table 6-2. Keypad Lock Commands
Command Function
ID.CODE#n (#n = ID Code number referenced)
ID.DESC#n (#n = item description)
ID.LOCATION#n (n = Item location))
ID.LOT#n (#n = lot number)
ID.PARTNUMBER#n (#n = part number) - Can enter up to
ID.QUANTITY#n (#n = quantity)
ID.TARE#1 (weight value)
ID.UNITS#1 (weight value in pounds)
ID.UNITWEIGHT#1 (weight value)
Command Parameter
ETH.DEFAULTGATEWAY Sets IP address
0.0.0.0
ETH.DHCP ON
ETH.DNSPRIMARY 0.0.0.0
ETH.DNSSECONDARY 0.0.0.0
ETH.IPADDRESS 192.168.0.1
ETH.LOCALHOSTNAME COUNTERPART
ETH.MACADDRESS 00-00-00-00-00-00
ETH.NETMASK 0.0.0.0
ETH.PORT 10001
ETH.REMOTESERVERIP 0.0.0.0
ETH.REMOTESERVERPORT 5466
Table 6-4. Ethernet Parameters
ETH.WEIGHVAULT OFF
Command Parameter
Table 6-4. Ethernet Parameters