3 hardware test, 2 test – QOMO QIR300 User Manual User Manual
Page 86
Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com
86
3.5.2.2 Test
You can click the
Test
button in the students tab or click the
Hardware
under
Settings
window to test the student remote keypad stroke.
To use the hardware test tool, follow these steps:
1.
Click the
Hardware
button to display the Hardware test window.
2.
Press a key on the student keypad; the key result will display on the corresponding ID row.
(This test can only test one student keypad for a time.)
3.
Press a key on the instructor keypad; the result will display on the teacher’s key grid.
You may press the
Reset
button to clear the test results; press the
OK
button to close the test window.
3.5.3 Hardware test:
You can click the
Hardware
under
Settings
window to test the student remote keypad stroke.
To use the hardware test tool, follow these steps:
1.
Click the
Hardware
button to display the Hardware test window.
2.
Press a key on the student keypad; the key result will display on the corresponding ID row.
(This test can only test one student keypad for a time.)