QOMO QIR300 User Manual - Manual (Page 19)

Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com 19
Note : To hide the tool bar, click the sign on the right corner of the tool bar window; to display
the tool bar, move the cursor to the bottom line of the entire window.
The display screen is divided into three segments:
• Register/Answer Status Bar
• Questions display
• Tool Status Bar
Register/Answer Status Bar : Displays the students logged in register number .The number is
displayed in successive order based upon first entry. Each number has a background color:
• Gray color – indicates the student keypad is in logout state
• Green color – indicates the student keypad is in login state
• Blue/Orange color – indicates response signal received. The color is toggled between blue
and orange each time the answer is changed, the system only records the last response
received before the test ends.
Tool Status Bar :
1. Control Buttons:
• Start/Pause – to start or pause the timer
• Stop – to stop the time
• Previous – return to the previous question page
• Next – turn to the next question page
• Exit – exit the current quiz session
• F1 –Controls the Register/Answering Status Bar size, by continuing to press the
button you will cycle the size from large to small and then disappear.
• F2 –Controls the Register/Answering Status Bar position, by continuing press the
button it will allow you to cycle the position from top, left and right.
• Report/Result / Display the instant report and result. Refer to the
session 3.1.1.7 Result and Report .
Note: All these control buttons are duplicated and displayed on the instructor remote keypad.
2. The Question Answer Timer:
• The timeout value is selected for each question during the quiz file set up.
• Timer box background colors are: Black : Stop; Green : Running ; Yellow : Pause.