Kontron ETXexpress-AI - Manual (Page 62)

Kontron ETXexpress-AI User’s Guide
57
— Advanced Pixel Adaptive De-interlacing
— Sharpness Enhancement
— De-noise Filter
— High Quality Scaling
— Film Mode Detection (3:2 pull-down) and Correction
— Intel® TV Wizard
» 12 EUs
» Dedicated analog and digital display ports are supported through the PCH
VGA
The analog VGA graphics core, with a maximum resolution of 1400x1050, is
integrated in the processor.
LVDS Flat Panel Interface (JILI)
The ETXexpress®-AI supports dual-channel LVDS via the COM Express™ connector.
The implementation of this subsystem complies with the COM Express™
specification. For additional implementation information, refer to the PICMG
COM Express™ Design Guide
on the PIGMG website.
4.4.7 Ethernet Interface
The Ethernet interface on the ETXexpress®-AI COM is the Intel® 82577LM PHY,
which contains an integrated 10/100/1000 Gigabit Ethernet MAC. This interface
is connected to Intel PCH PCIe Port 8. The controller supports a 10/100/1000
Base-T interface and it auto-negotiates the use of 10 Mbit/sec, 100 Mbit/sec
or 1Gbit/sec connections.
The network interface operates at its lowest power (<1W) when GbE is fully
active. The interface supports functions such as WOL (WakeOnLAN) and PXE
(Preboot eXecution Environment) boot.
For cable lengths and terminations on your baseboard, refer to the PICMG COM
Express™ Design G
uide on the PICMG website.
Configuration
The Ethernet controller is a PCI Express bus device. The BIOS allocates the
required system resources during the configuration of the PCIe device.