Kontron AT8902M CLI - Manual (Page 76)

Switching Commands AT8902M
AT8902M CLI Reference Manual Page 2 - 40
Default auto
Format
dot1x port-control {force-unauthorized | force-autho-
rized | auto}
Mode Interface Config
2.10.8.1 no dot1x port-control
This command sets the authentication mode on the specified port to the default value.
Format
no dot1x port-control
Mode Interface Config
2.10.9 dot1x port-control all
This command sets the authentication mode to use on all ports. Select
force-
unauthorized
to specify that the authenticator PAE unconditionally sets the controlled
port to unauthorized. Select
force-authorized
to specify that the authenticator PAE
unconditionally sets the controlled port to authorized. Select
auto
to specify that the
authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication
server.
Default auto
Format
dot1x port-control all {force-unauthorized | force-autho-
rized | auto}
Mode Global Config
2.10.9.1 no dot1x port-control all
This command sets the authentication mode on all ports to the default value.
Format
no dot1x port-control all
Mode Global Config
2.10.10 dot1x re-authenticate
This command begins the re-authentication sequence on the specified port. This
command is only valid if the control mode for the specified port is 'auto'. If the control
mode is not 'auto' an error will be returned.
Format
dot1x re-authenticate <slot/port>
Mode Privileged EXEC
2.10.11 dot1x re-authentication
This command enables re-authentication of the supplicant for the specified port.
Default disabled
Format
dot1x re-authentication
Mode Interface Config