Kontron AT8902M CLI - Manual (Page 182)

Quality of Service (QoS) Commands AT8902M
AT8902M CLI Reference Manual Page 4 - 14
Mode Class-Map Config
4.3.19 match secondary-vlan
This command adds to the specified class definition a match condition based on the
value of the layer 2 secondary VLAN Identifier field (the inner 802.1Q tag of a double
VLAN tagged packet). The secondary VLAN ID is an integer from 1 to 4095.
NOTE: This command is not available on the Broadcom 5630x platform.
Default none
Format
match secondary-vlan <1-4095>
Mode Class-Map Config
4.4 DiffServ Policy Commands
Use the DiffServ policy commands to specify traffic conditioning actions, such as
policing and marking, to apply to traffic classes
Use the policy commands to associate a traffic class that you define by using the class
command set with one or more QoS policy attributes. Assign the class/policy
association to an interface to form a service. Specify the policy name when you create
the policy.
Each traffic class defines a particular treatment for packets that match the class
definition. You can associate multiple traffic classes with a single policy. When a
packet satisfies the conditions of more than one class, preference is based on the order
in which you add the classes to the policy. The first class you add has the highest
precedence.
This set of commands consists of policy creation/deletion, class addition/removal, and
individual policy attributes.
NOTE: The only way to remove an individual policy attribute from a class
instance within a policy is to remove the class instance and re-add it to
the policy. The values associated with an existing policy attribute can
be changed without removing the class instance.
The CLI command root is
policy-map
.
4.4.1 assign-queue
This command modifies the queue id to which the associated traffic stream is assigned.
The queueid is an integer from 0 to n-1, where n is the number of egress queues
supported by the device.
Format
assign-queue
Mode Policy-Class-Map Config
Incompatibilities Drop