Kontron AT8902M CLI - Manual (Page 252)

Utility Commands AT8902M
AT8902M CLI Reference Manual Page 5 - 52
I – Init
M – More
MS – Master/Slave
Seq
Sequence Number of the DD packet.
LS_REQ packet field definitions:
Length
Length of packet.
LS_UPD packet field definitions.
Length
Length of packet.
LS_ACK packet field definitions.
Length
Length of packet.
5.11.11.1 no debug ospf packet
This command disables tracing of OSPF packets.
Format
no debug ospf packet
Mode
Privileged EXEC
5.11.12 debug lacp packet
This command enables tracing of LACP packets received and transmitted by the
switch.
Default
disabled
Format
debug lacp packet
Mode
Privileged
A sample output of the trace message is shown below.
<15> JAN 01 14:04:51 10.254.24.31-1 DOT3AD[183697744]:
dot3ad_debug.c(385) 58 %% Pkt TX - Intf: 1/0/1(1), Type: LACP, Sys:
00:11:88:14:62:e1, State: 0x47, Key: 0x36
5.11.12.1 no debug lacp packet
This command disables tracing of LACP packets.
Format
no debug lacp packet
Mode
Privileged EXEC