Kontron AT8902M CLI - Manual (Page 61)

AT8902M Switching Commands
Page 2 - 25 AT8902M CLI Reference Manual
Mode VLAN database
2.3.23.1 no vlan association mac
This command removes the association of a MAC address to a VLAN.
Format
no vlan association mac
Mode VLAN database
2.3.24 show vlan
This command displays detailed information, including interface information, for a
specific VLAN. The ID is a valid VLAN identification number.
Format
show vlan
Modes Privileged EXEC
User EXEC
VLAN ID There is a VLAN Identifier (VID) associated with each VLAN. The
range of the VLAN ID is 1 to 4094.
VLAN Name A string associated with this VLAN as a convenience. It can be up to
32 alphanumeric characters long, including blanks. The default is
blank. VLAN ID 1 always has a name of “Default.” This field is
optional.
VLAN Type Type of VLAN, which can be Default (VLAN ID = 1) or static (one
that is configured and permanently defined), or Dynamic (one that is
created by GVRP registration).
Interface Valid slot and port number separated by forward slashes. It is possible
to set the parameters for all ports by using the selectors on the top line.
Current Determines the degree of participation of this port in this VLAN. The
permissible values are:
Include - This port is always a member of this VLAN. This is equiva-
lent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equiva-
lent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically registered
in this VLAN via GVRP. The port will not participate in this VLAN
unless a join request is received on this port. This is equivalent to reg-
istration normal in the IEEE 802.1Q standard.
Configured Determines the configured degree of participation of this port in this
VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is equiva-
lent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equiva-
lent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically registered in
this VLAN via GVRP. The port will not participate in this VLAN