Kontron AT8902M CLI - Manual (Page 100)

Switching Commands AT8902M
AT8902M CLI Reference Manual Page 2 - 64
Max Response Time Displays the amount of time the switch waits after it sends a
query on an interface, participating in the VLAN, because it did not
receive a report for a particular group on that interface. This value may
be configured.
Multicast Router Present Expiration Time Displays the amount of time to wait
before removing an interface that is participating in the VLAN from
the list of interfaces with multicast routers attached. The interface is
removed if a query is not received. This value may be configured.
When you specify a value for , the following additional information appears:
VLAN Admin Mode Indicates whether IGMP Snooping is active on the VLAN.
2.15.10 show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Format
show igmpsnooping mrouter interface <slot/port>
Mode Privileged EXEC
Interface Shows the port on which multicast router information is being dis-
played.
Multicast Router Attached Indicates whether multicast router is statically enabled
on the interface.
VLAN ID Displays the list of VLANs of which the interface is a member.
2.15.11 show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
Format
show igmpsnooping mrouter vlan <slot/port>
Mode Privileged EXEC
Interface Shows the port on which multicast router information is being dis-
played.
VLAN ID Displays the list of VLANs of which the interface is a member.
2.15.12 show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the MFDB table.
Format
show mac-address-table igmpsnooping
Mode Privileged EXEC
MAC Address A multicast MAC address for which the switch has forwarding or fil-
tering information. The format is two-digit hexadecimal numbers that
are separated by colons, for example 01:23:45:67:89:AB. In an IVL
system the MAC address is displayed as a MAC address and VLAN
ID combination of 8 bytes.
Type Displays the type of the entry, which is either static (added by the user)
or dynamic (added to the table as a result of a learning process or pro-
tocol).