19 show boardinfo led, 20 show boardinfo amc connection, 21 show boardinfo amc fru – Kontron AT8902M CLI User Manual
Page 219: 22 show boardinfo amc ipmidev, 23 show boardinfo xfp, 24 show boardinfo cpu-load, At8902m utility commands
AT8902M
Utility Commands
Page 5 - 19
AT8902M CLI Reference Manual
5.3.19
show boardinfo led
This command displays the LED status.
Format
show boardinfo led
Mode
Privileged EXEC
5.3.20
show boardinfo amc connection
This command displays the connections to an AMC carrier.
Format
show boardinfo amc connection {amcb1|amcb2}
show boardinfo amc connection all
Mode
Privileged EXEC
5.3.21
show boardinfo amc fru
This command displays various FRU (field replaceable unit) related information (or all
FRU information) for a specified AMC.
Format
show boardinfo amc fru product-info {amcb1|amcb2}
show boardinfo amc fru board-info {amcb1|amcb2}
show boardinfo amc fru multi-record {amcb1|amcb2}
show boardinfo amc fru custom-area {amcb1|amcb2}
show boardinfo amc fru all {amcb1|amcb2}
Mode
Privileged EXEC
5.3.22
show boardinfo amc ipmidev
This command displays the IPMI device information. This consists of Firmware
Revision, IPMI version, Manufacturer and Product ID.
Format
show boardinfo amc ipmidev
Mode
Privileged EXEC
5.3.23
show boardinfo xfp
This command displays information for a specified or all existing XFP’s. The
information are control/status information (via CPLD register) and/or the eeprom data.
Format
show boardinfo xfp
show boardinfo xfp
show boardinfo xfp all
show boardinfo xfp all {state | eeprom}
Mode
Privileged EXEC
5.3.24
show boardinfo cpu-load
This command displays the CPU load. It shows the total time, the user time, the system
time and the idle time in current interval, 30 seconds interval and 5 minutes interval.
All times are reported in percent.
Format
show boardinfo cpu-load
Mode
Priviliged EXEC