Kontron AT8902M CLI - Manual (Page 231)

AT8902M Utility Commands
Page 5 - 31 AT8902M CLI Reference Manual
5.7.8.1 no sntp server
This command deletes an server from the configured SNTP servers.
Format
no sntp server remove
Mode
Global Config
5.7.9 show sntp
This command is used to display SNTP settings and status.
Format
show sntp
Mode
Privileged EXEC
Last Update Time
Time of last clock update.
Last Attempt Time
Time of last transmit query (in unicast mode).
Last Attempt Status
Status of the last SNTP request (in unicast mode) or
unsolicited message (in broadcast mode).
Broadcast Count
Current number of unsolicited broadcast messages that
have been received and processed by the SNTP client since
last reboot.
Multicast Count
Current number of unsolicited multicast messages that
have been received and processed by the SNTP client since
last reboot
5.7.10 show sntp client
This command is used to display SNTP client settings.
Format
show sntp client
Mode
Privileged EXEC
Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version
The highest SNTP version the client supports
Port
SNTP Client Port
Client Mode
Configured SNTP Client Mode
5.7.11 show sntp server
This command is used to display SNTP server settings and configured servers.
Format
show sntp server
Mode
Privileged EXEC
Server IP Address
IP address of configured SNTP Server
Server Type
Address Type of Server.
Server Stratum
Claimed stratum of the server for the last received valid
packet.
Server Reference ID
Reference clock identifier of the server for the
last received valid packet.
Server Mode
SNTP Server mode.