At8902m quality of service (qos) commands – Kontron AT8902M CLI User Manual
Page 189
AT8902M
Quality of Service (QoS) Commands
Page 4 - 21
AT8902M CLI Reference Manual
Assign Queue Directs traffic stream to the specified QoS queue. This allows a traffic
classifier to specify which one of the supported hardware queues are
used for handling packets belonging to the class.
Class Name The name of this class.
Committed Burst Size (KB) The committed burst size, used in simple policing.
Committed Rate (Kbps) The committed rate, used in simple policing,
Conform Action The current setting for the action taken on a packet considered to
conform to the policing parameters. This is not displayed if policing is
not in use for the class under this policy.
Conform COS The CoS mark value if the conform action is set-cos-transmit.
Conform DSCP Value The DSCP mark value if the conform action is set-dscp-trans-
mit.
Conform IP Precedence Value The IP Precedence mark value if the conform action
is set-prec-transmit.
Drop
Drop a packet upon arrival. This is useful for emulating access control
list operation using DiffServ, especially when DiffServ and ACL can-
not co-exist on the same interface.
Mark CoS
The class of service value that is set in the 802.1p header of inbound
packets. This is not displayed if the mark cos was not specified.
Mark IP DSCP The mark/re-mark value used as the DSCP for traffic matching this
class. This is not displayed if mark ip description is not specified.
Mark IP Precedence The mark/re-mark value used as the IP Precedence for traffic
matching this class. This is not displayed if mark ip precedence is not
specified.
Mirror
Copies a classified traffic stream to a specified egress port (physical
port or LAG). This can occur in addition to any marking or policing
action. It may also be specified along with a QoS queue assignment.
This field does not display on Broadcom 5630x platforms.
Non-Conform Action The current setting for the action taken on a packet considered
to not conform to the policing parameters. This is not displayed if
policing not in use for the class under this policy.
Non-Conform COS The CoS mark value if the non-conform action is set-cos-trans-
mit.
Non-Conform DSCP Value The DSCP mark value if the non-conform action is set-
dscp-transmit.
Non-Conform IP Precedence Value The IP Precedence mark value if the non-con-
form action is set-prec-transmit.
Policing Style The style of policing, if any, used (simple).
Redirect
Forces a classified traffic stream to a specified egress port (physical
port or LAG). This can occur in addition to any marking or policing
action. It may also be specified along with a QoS queue assignment.
This field does not display on Broadcom 5630x platforms.