ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 54)

54 | Upload Utility
Baud: 9600
Parity: None
Data Bits: 8
Stop Bit: 1
You are now ready to upload log file data to the computer.
Upload Data
Connect the HI-4460 to your computer using either the fiber optic port or the
RS-232 port. Start Upload Utility on the computer.
On the HI-4460, go to the Upload menu.
S TART H EADER
Displays the two newest log files in memory with the newest log file selected.
E ND H EADER
Displays the two newest log files in memory with the newest log file selected.
More than one log file may be sent at once, but by default only the newest log file
in memory will be sent.
To upload a block of files, select them using the up MODE key, down MODE key,
BACK/ENTER key, and SCREEN/SELECT key. Files must be selected by the
block, so all log files between the Start Header file selected and End Header file
selected will be uploaded.
To define a block of files, select the end file from the desired block; the file with
the oldest date desired. Then return to the Start Header and select the beginning
file from the desired block; the file with the newest date desired.
Archived 4/2/10