ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 28)

28 | Screens
This shows the composite value in
large digits as well as a matrix of
values for each axis and the
composite. Only the values that were
selected to be logged in the logging
setup menu will appear on the
screen.
• The PT values for the X, Y, and Z axes are the log point values taken at the
log rate interval selected in the logging setup screen.
• The PT value for C is the composite of the X, Y, and Z values.
• The MIN and MAX values are the minimum and maximum numbers
obtained by the sample rate, either 2/sec or 6/sec, during the log rate
interval.
• The AVG value is the average of all samples, either 2/sec or 6/sec, divided
by the log rate interval.
Archived 4/2/10