ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 45)

Logging | 45
• FILE TO VIEW—Selects the log file to be viewed. The first seven log files
display, if they exist. The first file is selected by default. To view it, select
DATA or GRAPH. Use the up and down MODE key to select a different
log file.
• DETAIL—Views log file information. This is a read-only view of information
selected in the SETUP menu. The LOG submenu in the DETAIL submenu is
used to view information on what data is being logged.
• DATA—Reviews the file in numerical mode. The numerical review shows a
screen similar to the log setup screen. Only logged values are shown. Use
menu keys corresponding to the arrows at the bottom of the screen to move
through the log file data.
• GRAPH—Reviews the file in graphical mode. You can review up to three
variables graphically. Only values that have been logged are available. Use
the up and down MODE key, the BACK/ENTER key, and the
SCREEN/SELECT key to choose the item to be viewed for each graph. Use
the menu keys corresponding to the arrows at the bottom of the screen to
move through the log file data.
Use the arrows in the menu area and the corresponding function keys
to move through data. The single arrows move one data point at a
time. Double arrows scroll to the opposite end of the data, or to the
next full screen of data.
UPLD Menu
Uploads log file information to a
computer or other device. See
Upload Utility on page 53 for more
information.
Archived 4/2/10