ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 47)

Logging | 47
CLEAR Menu
Clears data log files.
• START HEADER—Displays the two newest log files in memory. The
newest log file is selected by default.
• END HEADER—Displays the two newest log files in memory. The newest
log file is selected by default. More than one log file may be cleared at once.
By default, only the newest log file in memory will be cleared. If a block of
the files are to be cleared, they must be selected using the up and down
MODE key, the BACK/ENTER key, or the SCREEN/SELECT key. Files
must be selected by the block, so all log files between the start header file
and end header file selected will be cleared. To define a block of files, select
the end file from the block desired (the file with the oldest date desired).
Return to the START HEADER and select the beginning file from the block
desired (the file with the newest date desired).
• CLEAR DATA—Move to CLEAR DATA and press the
SCREEN/SELECT key. Use the up MODE key and down MODE key to
select YES. Press the BACK/ENTER key twice to clear the selected data.
Archived 4/2/10